In order to effectively raise the level of drought relief and realize the goal of water-saving irrigation, the significance of soil moisture and drought management systems in the current agricultural field is very prominent, especially in the real-time monitoring and transmission management of soil moisture, for irrigation operations. The implementation provides timely and effective public opinion information.
As an important manifestation of the current application of science and technology in agricultural production, the soil moisture and drought management system not only achieves real-time data collection, storage and transmission, but also users can select GSM short message mode and GPRS network mode to transmit data as required. Each sensor has high precision, stable performance, low power consumption, superior communication capabilities to meet the needs of different customers; soil moisture and drought management system is easy to install and maintain, stable performance, high reliability, low failure rate, suitable for China's various climates Real-time monitoring of the main soil types in the area. Unattended automated monitoring improves work efficiency and reduces the labor intensity of staff.
At the beginning of the design of the soil moisture and drought management system, the actual conditions and needs of soil moisture monitoring in China were fully taken into consideration. Therefore, the design was conducted in strict accordance with the â€œSoil Condition Monitoring Specification SL000-2006 People's Republic of China Water Conservancy Industry Standardâ€. In order to meet the needs of different users, the soil moisture and drought management system can also match soil moisture, soil water potential, soil temperature, electrical conductivity, air temperature, air humidity, wind speed, wind direction, and rainfall. The sensor products such as light intensity, carbon dioxide, evaporation, leaf surface temperature, leaf surface humidity, photosynthetically active radiation, etc., have achieved the requirements of customization, and can be perfectly adapted to the needs of public opinion monitoring work in the region with only minor changes.
In any case, the design of soil moisture and drought management system is in full compliance with the "Soil Regulatory Monitoring Regulations SL000-2006 People's Republic of China Water Industry Standards", so its basic function is fully able to meet the actual needs of soil moisture and drought management at this stage. , And from the current situation of demonstration applications in various regions, the application of soil moisture and drought management systems has indeed played its due function and effect.
1. Product description:
Welding fume extraction system with Extraction Arms is a kind of central dust collection system, which is also also cantilever type fume extraction system. It can has dozens of extraction arm to meet many welding station fume removal at one time.
2. Moland Product Series
Moland Portable Fume Extractor series contain of MLWF50, MLWF70, MLWF100, MLWF360, MLWF120, MLWF200, MLWF280-basic, MLWF280S, MLWF290, MLWF300, MLWF300A, MLWF350, MLWF350D, MLWF400, etc.
Except portable fume extractors, we also supply stationary fume extractors (MLWF350-dust bucket type, MLWF500-6T, MLWF500-6T dust bucket type, MLWF500-9T, MLWF800, MLWF800-dust bucket type, MLWF1000, MLWF1500, MLWF2000, MLWF3000, MLWF3500, MLWF4000). The electric control cabinet can be seperated from main equipment for convenient operation when the main equipment is placed outdoors.
Grinding dust extractors are our another dust extraction product series, which contain of downdraft table (MLWF100D, MLWF150D, MLWF200D, MLWF320-DM, MLWF180, MLWF380, MLWF480) and grinding cabinet (MLWF900). The grinding cabinet is usally equipped with telescopic or fixed grinding room, to form a semi-closed space to control dust and smoke spread. It also improves the filtration efficiency with low air volume and energy consumption.
In order to provide advanced products, our R&D department develops 3 to 5 new products every year, and irregularly improves the performance, appearance, and installation methods of existing products.
Moland participates at least 5 industry exhibitions each year.
6. Central Fume Extraction System
1) Cantilever type fume extraction system
Cantilever dust removal can be used for manual welding conditions where the work stations are evenly distributed and the span is small. The smoke and dust generated by each welding station can be effectively absorbed at the dust generation point, and will not pollute other parts of the workshop. The skeleton of the suction arm is similar to a human arm and can hover in a space within a certain length. The outer layer of the suction arm is a temperature-resistant hose, which not only prevents the hose from being burned by sparks, but also ensures the flexibility of the movement of the suction arm. A unique rotating structure is designed on the position of the Suction Hood to ensure that the suction hood can be aligned with the welding position in any orientation, so that the suction arm can effectively capture the smoke and dust generated during the welding process. The advantage of the suction arm capture is that it can be close to the place where the smoke is generated, and the collection effect is better.
2) Hood suction type fume extraction system
Cantilever dust removal can be used for manual welding conditions where the work stations are evenly distributed and the span is small. The smoke and dust generated by each welding station can be effectively absorbed at the dust generation point, and will not pollute other parts of the workshop. The skeleton of the suction arm is similar to a human arm and can hover in a space within a certain length. The outer layer of the suction arm is a temperature-resistant hose, which not only prevents the hose from being burned by sparks, but also ensures the flexibility of the movement of the suction arm. A unique rotating structure is designed on the position of the suction hood to ensure that the suction hood can be aligned with the welding position in any orientation, so that the suction arm can effectively capture the smoke and dust generated during the welding process. The advantage of the suction arm capture is that it can be close to the place where the smoke is generated, and the collection effect is better.
3) Room tupe fume extraction system
Room-type dust removal is suitable for the purification of fumes and smoke generated during the production of automated equipment, such as welding robots, welding machines, grinding, grinding and polishing of metal and plastic parts, drilling, thermal processing, cutting and crushing, stone processing, powder packaging, solid particles and various dusts and fumes produced by mixing and processing.
For working conditions such as robot automatic welding, circular seam and longitudinal seam welding, the smoke and dust purifier is installed with the robot workstation, so that the workstation has its own dust removal function. The fume and smoke are effectively collected through equipment components such as pipes and dust hoods. The room-type design prevents the volatilization and diffusion of smoke to keep the air in the workshop clean.
The working conditions with moderate welding workpieces and large amounts of dust and smoke are suitable for room-type treatment solutions. The room type centralized dust dedusting solution is divided into side suction and top suction method dust collecting ways. The appropriate solution can be designed according to the site conditions and treatment goals.
4) Blow suction type fume extraction system
Blow-suction type dust removal solution is a ventilation air flow composed of blown air and inhaled air flow. Therefore, it is a dust removal method that can effectively control the spread of pollution sources. This dust removal method is installing exhaust inlets on two-span center column or single-span side column (wall) and air outlets on the opposite wall column to form a circulating air flow to drive the smoke and dust into the purification machine, consequently performing overall dust removal and purification in the workshop. This system occupies a small area and has obvious purification effect, which is suitable for the purification of smoke and smoke in more complex production workshops.
7. Company information
Jinan Moland Environmental Tech Co., Ltd., is located in No. 11889 Jingshi West Road, Changqing District, Jinan City, Shandong, China, established in 2016. It`s an environmental protection technology enterprise specializing in research, development, manufacture and sale of efficient smoke purification systems.
The company is committed to reducing the environmental impact of production process, protecting workers from harmful gases and dust, and creating a cleaner working environment. At present, the companyâ€²s products have been successfully applied in automobile, railway, construction machinery, marine engineering, aviation and other mechanical processing industries, as well as new materials, grain, wood, recycled resources processing and other industries. The company has passed the ISO 9001 quality management system certification, obtained the certification of China Environmental Protection Products issued by China Environmental Protection Industry Association, and CE certification of EU. It also has a number of invention patents, utility model patents and appearance patents. Through continuous R&D and innovation, many products of the company have reached the international leading level.
Molandâ€²s environmental services cover the whole process from project design, product manufacturing to installation, commissioning and after-sales service. We will provide you with the most professional governance program and the best quality service.
Fume Extraction With Extractor Arms,Welding Fume Purifier Machine,Industrial Centralized Fume Extractor,Air Ventilation System
Jinan Moland Environmental Tech Co.,Ltd , https://www.sdmoland.com