Model NO.: LW30/80-3
Low-Voltage: Schneider
Motor: Chiese Top Servo Motor
Technique: Single Model and Double Helix
Programmable Logic Controller: Japan Mitsubishi PLC
Alarm: Alarm Device
Electic&Machinery: Taiwan Teco Electric
Unit Weight: 4200kg
Material: Galvanized Iron Wire
Application: Construction Wire Mesh
Surface Treatment: Galvanized
Trademark: JIAKE
Transport Package: Plastic Films/Woden Box
Specification: CE
Origin: Hebei, China
HS Code: 8463300000
DescriptionIllustration of working principle:
Chain link machine for manufacturing chain link fences of different sizes. The wire is taken in from the payoff stand and passed through the dies where the diamond size takes place. Different gap sized. After passing from the die of diamond pattern wire is automatically thrown on the winding shaft in the stitching process. Once the stitching is complete the woven is manually glided down to the next stitch to take place.
Application: Chain Link Fence is extensively used as fences for playground and gardens, highway, railway, airport, port, residence, etc.
Advantages:
1. It adopts the technique of single model and double helix and it can improve the work efficiency greatly.
2. Japan Mitsubishi PLC (Programmable Logic Controller)
3. French Schneider inverter
4. Chinese top servo motor (make the production more precise).
5. There are two ways for the side of chain link fence, one is twisted the other is with burr in edge.
6. There is a controller cabinet hanging and it can set the length of the wire mesh, once the weaving finish, it will stop.
7. An alarm device has been installed, once the production is completed, the alarm will ring. There is a limit switch and it can stop immediately.
8.Speed of die:500r/min
Technical Parameter
| Model | LW30/80-3/4 | |
| Width scope of weaving | ≤3m/4m | |
| Mesh scope of weaving | 25mm-80mm | |
| Wire scope | 3mm | |
| Outside size | Main machine | 6700*1430*1800 |
| Net reel | 5100*1700*1250 | |
| Motor | Servo Motor | 5.5kw |
| Cutter | 1.5kw | |
| Rolling | 0.75kw | |
| Raw Material | Galvanized wire;PVC bag steel wire | |
| Diameter of wire | Mesh opening size |
| 1.8mm | 30-40mm |
| 2.0mm | 30-50mm |
| 2.2mm | 30-60mm |
| 2.5mm | 40-70mm |
| 2.8mm | 50-80mm |
| 3.0mm | 60-80mm |
| 3.2mm | 70-80mm |
| 3.5mm | 80-100mm |
| 4.0mm | 100mm*100mm |
Contact Information
Â
Â
Â
Â
The belt conveyor is widely used in such industries as of metallurgy, mining, coal, harbor, power station, building materials, chemical engineering, light industry, petroleum, grains, heating, etc.
Conveyor is adaptable to both stationary and mobile crushing plants, it is widely used in mining, metallurgical, and coal industry to transfer sandy or lump materials, or packaged materials. The transfer system can be one single or multi-conveyors or combined with other transfer equipments according to various transferring requirements.
Rubber Conveyor Belt,Tunnel Belt Conveyor,Conveyor Belt Pulley,Steel Belt Conveyor
Shenyang Sanland Mining Equipment Manufacture Co., Ltd. , https://www.sanlandcrushers.com